Consumption: approx. 200-300g / m2 per coat; 2.5kg up to 12.5m2 l 5kg up to 25m2 l 10kg up to 50m2 l 20kg up to 100m2
For new and renovation coating of swimming pools / Easy application with a roller
Significantly longer service life than normal 1K chlorinated rubber or PU paints
High resistance to chlorine, water care products, moisture, salt, acids and alkalis
High strength combined with excellent residual toughness
Suitable for cement plaster, concrete, primed metal and GRP
Versatile application: pool coatings for swimming pools, swimming pools and paddling pools, fountain pools, fountains, etc.
Suitable for repainting as well as for pool refreshment or pool renovation.
Water-based = environmentally friendly and low-odor
2-Pack Swimming pool paint SL450 2,5-20Kg
Product description
The HIGH-END solution among swimming pool coatings. As a final seal, SL450 is mechanically and chemically more stable and has a longer service life than commercially available 1K swimming pool paints based on chlorinated rubber or PU.
Product advantages
For new and renovation coating of swimming pools
Suitable for cement plaster, concrete, primed metal and GRP
High coverage
Easy application with a roll
High strength combined with excellent residual toughness
High resistance to chlorine, water care products, moisture, salt, acids and alkalis
No “chalking” (formation of a whitish layer) as with 1K swimming pool paints
No tendency to drip or "dripping nose"
Significantly longer service life than normal 1K chlorinated rubber or PU paints
Consumption: approx. 200-300g / m2 per coat; 5kg - 25m2 l 10kg - 50m2 l 20kg - 100m2 l 25kg - 125m2
SL430 2-Pack Pool slurry type sealer and SL450 2K Pool Paint form a perfectly coordinated composite system. The SL430 primarily takes on the sealing function and serves as a bonding agent for the SL450. SL450 ensures a beautiful look and a pleasant feel. Both products are always required on mineral substrates (e.g. tiles, concrete, cement) in order to reliably seal the pool.
Surface preparation:
The surface must be at least 4 weeks old, must not have any holes or voids (without painting) and be completely dry and clean when the first coat is started. Thoroughly remove loose layers, then wash off the entire surface with a special thinner and only start applying the first layer after it has dried.
2-Pack Swimming pool coating (component A)
This product complies with the requirements of the directives 2004/42 / EG and 2010/79 / EU on the limitation of the VOC content.
2-Pack Swimming pool coating (component B)
Causes serious eye damage
Keep out of the reach of children / wear protective gloves / protective clothing / eye protection / face protection / In case of contact with eyes: rinse cautiously with water for several minutes. Remove any existing contact lenses if possible. Continue rinsing / If skin irritation or rash occurs: Get medical advice / get medical attention / If eye irritation persists: Get medical advice / get medical attention / Dispose of contents / container to a suitable recycling or disposal facility
This product complies with the requirements of the directives 2004/42 / EG and 2010/79 / EU on the limitation of the VOC content.
