2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg
2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg
2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg
2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg
2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg
2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg

2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg

Versandkostenfrei innerhalb DE
64,90€
64,90€
12,98€ kg

inkl. MwSt.

Size: 5Kg
  • PayPal
  • Mastercard
  • Maestro
  • Visa
  • Klarna
  • Apple Pay
Beschreibung
  • Extremely hard-wearing | Made in Germany
  • Consumption / coverage: 1.6 kg/m2 per coat (2 coats recommended)
  • Waterproofing swimming pools and as a substrate preparation for swimming pool paint
  • Sealant is extremely waterproof, weather resistant and scratch resistant
  • Sealing slurry protect concrete from chemicals and acids
  • Optimal for swimming pools, concrete cisterns, ponds, fountains, sauna pools.
  • Adheres to tiles, concrete, cement, formwork blocks/shuttering blocks
  • Sealing compound can be easily applied with a smoothing trowel
  • Mixing ratio is 3:1 (powder component:liquid component)
  • Note: apply thinly and evenly
Produktdaten

Product Description:

Flexible Sealing slurry SL430 is a 2-component sealing slurry based on cement, mineral fillers, special additives and synthetic polymers. Due to the high content of synthetic resins, SL430 adheres perfectly to a wide variety of surfaces and after drying creates a flexible and impermeable protective layer.

SL430 is fiber reinforced, does not cause corrosion of metals and after curing it becomes resistant to low temperatures and chlorine.

SL430 2-Pack Swimming Pool Sealing Slurry and SL450 2-Pack Swimming Pool Coating form a perfectly matched composite system.

SL430 primarily performs the sealing function and serves as an adhesion promoter for SL450

SL450 provides a beautiful look and pleasant feel.

On mineral substrates (e.g. tiles, concrete, cement), both products are always required to reliably seal the pool.

Consumption / coverage: 1.6 kg/m2 per coat (2 coats recommended)

Mixing ratio:

3 parts powder component : 1 part liquid component

Recommended add-on products:

  • W810 – Special pre-cleaner
     for cleaning the substrate
  • SL400 – Pool paint is a quick-drying, highly water-resistant, abrasion-resistant as well as scratch- and impact-resistant swimming pool paint
  • SL450 – 2-Pack Swimming Pool Paint as a final sealant is much more mechanically and chemically stable and durable than commercial 1 commponent swimming pool paint on chlorinated rubber or PU basis
    • Produktinformationen
    This 2-component epoxy slurry is used to seal swimming pools and as a substrate preparation for SL 450 2-Pack Swimming Pool Paint.
    H-Sätze
    2-Pack Swimming Pool Sealing Slurry - Liquid (Kom.A) The mixture is classified as non-hazardous according to Regulation (EC) No 1272/2008 [CLP]. 2-Pack Swimming Pool Sealing Slurry - Powder (Com.B) Causes skin irritation. / May cause allergic skin reactions. / Causes serious eye damage. / May cause respiratory irritation. Keep out of the reach of children. / Wear protective gloves / protective clothing / eye protection / face protection / In case of contact with skin or hair: Take off immediately all contaminated clothing. Wash skin with water or take a shower. / In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. / Immediately call poison center or doctor / Wash contaminated clothing before wearing again. / Dispose of contents / containers to hazardous waste collection point.