Help
#Größe_5L
#Größe_750ml
#Größe_1L
#Größe_10L
Natural stone oil for marble mosaic impregnation protective granite W250 1-10L
Natural stone oil for marble mosaic impregnation protective granite W250 1-10L
Natural stone oil for marble mosaic impregnation protective granite W250 1-10L
Natural stone oil for marble mosaic impregnation protective granite W250 1-10L
Natural stone oil for marble mosaic impregnation protective granite W250 1-10L
Roll over image to zoom in Click on image to zoom
#Größe_5L#Größe_750ml#Größe_1L#Größe_10LNatural stone oil for marble mosaic impregnation protective granite W250 1-10LNatural stone oil for marble mosaic impregnation protective granite W250 1-10LNatural stone oil for marble mosaic impregnation protective granite W250 1-10LNatural stone oil for marble mosaic impregnation protective granite W250 1-10LNatural stone oil for marble mosaic impregnation protective granite W250 1-10L

Natural stone oil for marble mosaic impregnation protective granite W250 1-10L

Save €5,00
WO-WE
No reviews
Größe: 1L
Price:
€19,90 €24,90

Description

Stone oil - MADE-IN-GERMANY / TOP QUALITY 

Easy to process / Penetrates deeply and fills the pores

Dirt and water repellent / For indoor and outdoor use

NATURAL STONE OIL suitable for natural stones such as slate, granite, terracotta, terrazzo etc.

CONSUMPTION = approx. 8m² / L

Natural stone oil for marble mosaic impregnation protective granite W250 1-10L

The W250 natural stone oil is ideally suited for the protection and maintenance of stone, concrete and screed floors, both indoors and outdoors.

The W250 protects the surface of the stone from dirt and moisture. For all open-pored and absorbent types of stone such as marble, tuff, granite, concrete, screed etc. The natural stone oil penetrates deep into the stone and fills it open the pores, effectively preventing dirt and moisture from penetrating.

  • Enhances color and structure
  • You get a rich-looking, hard-wearing and water-repellent surface
  • Solvent-free
  • High yield
  • Open to diffusion
  • Due to its natural composition, the coating cannot crack or burst

    Consumption

    1. Coating: 120ml / m²

    2. Coating: 80-100ml / m²

    Top coat: 60-100ml / m².

    Consumption increases with highly porous or rough surfaces.

    Preparation

    The surface must be clean and dry. Processing and floor temperature must be at least 15 ° C. In the interior, the underfloor heating must be used for at least 6-10 hours

    Switch off before starting work. Start up again 48 hours after the last treatment with a flow temperature of 25-30 ° C.

    • You may also like

    H-Statements

    Keep out of the reach of children / If medical advice is needed, have container or label ready

    The product is classified as not dangerous according to the regulation
    (EC) No. 1272/2008 [CLP].

    Last viewed